Special Vcr Features (Vcr Lock, Warning Beeper) - Panasonic Omnivision VHS PV-M2046 Operating Instructions Manual

Special VCR Features
[--_Check list before you begin
[] All connections are made (see page 5).
[] Your Combination VCR is plugged in.
VCR Lock Feature
When activated, this feature prohibits all operations except tot timel
recording, and tape eject. This is useful to prevent misoperation and
protect your Combination VCR from curious children.
_ ....... / _iiljiiiiiiiiiiiiiiii_
STOP/EJECT
STOP_JECT
Hold down STOP/EJECT on
the Combination VCR for 7
seconds during Stop, or
Power OFF mode.
VCR LOCK ACTIVATED
To Cancel the VCR Lock feature,
STOP/EJECT
Hold down STOP/EJECT on
the Combination VCR for 7
seconds again during Stop,
or Power OFF mode.
VCR LOCK OFF
• VCR Lock mode is cancelled automatically after
24 hours when the clock is set.
• This feature cannot be activated or canceled when
a timer or one touch recording is in progress.
C_ RO]ATE TO SELECT
N
PROG
//oool_0
Warning Beeper Feature
When you select BEEPER ON as described below, a short warning will
sound each time an invalid entry or operation is made and a timer
program is set.
MENU
Push MENU to
display the menu.
Rotate and push the
WHEEL to select "VCR".
MAIN MENU
C H CLOCK EX I T
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
Rotate the WHEEL to
select "BEEPER", then
push to select "ON" or
"OFF".
..... SET UP VCR ....
REPEAT PLAY : OFF
SELEC3 HOIAIE WHEEL
SET PUSH WHEEL
END PUSH MENU KEY
MENU
Push MENU twice to
exit this screen.
18