Epson Stylus C120 Series Quick Manual page 19

9. Place the new ink cartridge into the cartridge holder and push it down until it
clicks into place.
10. Once you replace any other cartridges that need replacing, close the ink
cartridge cover and press it until it clicks into place.
11. Close the printer cover.
12. Press the ink button. The printer begins charging ink and the P power
H
light starts flashing. This takes about 1 1/2 minutes. When it's finished, the
P power light stops flashing and remains on, and the
Caution:
Never turn off the printer while the P power light is flashing or you'll waste ink.
If you removed a low or expended ink cartridge, you cannot reinstall and use the
cartridge.
Note:
If the H ink light stays on (not flashing), the ink cartridge may not be installed
correctly. Press the
into place.
ink button again and reinstall the ink cartridge until it clicks
H
ink light goes out.
H
Replacing Ink Cartridges
19