Usb Dubbing (Usb --_ Dvd); Before Usbdubbing; Connecting To The Usbjack - Sony RDR-VX560 Operating Instructions Manual

Before USBDubbing
This section explains the t`ollowing dubbing
methods via the USB jack:
• Dubbing all the video contents of the connected
DVD camcorder to make a backup DVD
(page 90).
• Dubbing the selected video contents of the
connected HDD camcorder to a DVD (page 91 ).
• Copying JPEG image files to a DVD (page 93).
ll, Connectable USB devices (as of January 2008)
The following Sony devices can be connected to
this recorder:
DVD camcorder: DCR-DVD108
HDD camcorder: DCR-SR42
Digital still camera: DSC-W200/TI00/T20/W80/
W90/H7/H9/G 1
"_" Hint
ll' your HDD cmncorder has no USB .jack, use the
Handycam Station supplied with the camcorder.
• During dubbing, do not disconnect the USB device.
• USB cables exclusive for supplying power cannot be
used.
• Connect the camcorder or digital still camera directly to
the recorder, not via a USB hub or other USB device.
• Do not connect the DV IN jack at the same time.
Connecting to the USBjack
You can connect a USB device (DVD camcorder,
HDD camcorder, digital still camera, etc.) to the
USB jack on the recorder.
Also refer to the instruction manual supplied with
the connected USB device before connecting.
VCR-DVD recorder
to _ (USB)
USB cable
(not supplied)
to USB output
DVD camcorder, HDD
camcorder, digital still
camera, etc.
1
2
3
I_. : Signal flow
Turnontherecorder andtheUSBdevice.
Connect theUSBdevice tothe _ (USB)
jackon therecorder.
SetyourUSBdevice totheUSB connecting
mode,if necessary.
As an example for the HDD camcorder:
When "USB SELECT" appears on the
cmncorder' s screen, select "_)
COMPUTER."
As an example for the digital still camera:
Bet`ore connection, make sure that the USB
mode of digital still camera is "Mass Storage."
You can not use "PictBridge" mode for
connecting to this recorder.
For details, refer to the operating instructions
supplied with the connected USB device.
t--
==
t--
89us