Sony RDR-VX560 Operating Instructions Manual page 55

4
PressREC NODE repeatedly toselectthe
recording mode.
The display changes on the TV screen as
follows:
5
6
7
8
HQ =-_ HSP --_ SP -=_ LSP
t !
SLP _-= EP -*= LP -*= ESP
For details about the recording mode, see
page 47.
PressSYSTEM MENU whiletherecorder i s
instopmode.
Select"Setup," andpress ENTER.
Select "Features," andpressENTER.
The "Features" setup appears.
Select"SynchroRecording," a ndpress
ENTER.
9 Select "to DVD,"andpressENTER.
10
PressSYSTEM MENUtoturnoffthemenu.
11
Setthetimeron theconnected e quipment
tothetimeyouwanttorecord,andturnit
off.
12
PressSYNCHRO REC.
The SYNC-REC indicator lights up in the
fi'ont panel display and the recorder stands by
for Synchro-Rec.
The recorder starts recording when a signal is
received fiom the connected equipment.
When the connected equipment turns off. the
recording stops and the recorder turns off.
Tostoprecording
Press • STOP twice.
To cancel a Synchro-Rec function
Press SYNCHRO REC before recording starts.
The SYNC-REC indicator turns off in the front
panel display.
If you press SYNCHRO REC during Synchro-
Rec, the recording stops, the SYNC-REC
indicator turns off. and the recorder turns off.
Ifthetimersettings of a Synchro-Recording
andanother t imerrecording overlap
Regardless of whether or not the program is a
Synchro-Rec program, the program that starts first
has priority. The recorder starts recording the
second program about ten seconds after the first
program has finished. If the end time of one
setting and the start time of another timer setting is
the same, the beginning of the program that starts
later will be cut.
Program 1
Program 2
7:00 8:00
[ ]
i
9:00 10:00
will be cut off
• The recorder starts recording only after detecting the
video signal from the connected equipment. The
beginning of the program may not be recorded
regardless of whether or not the recorder' s power is on
or off.
• To use the connected equipment during Synchro-Rec
standby, cancel the standby mode by pressing
SYNCHRO REC. To return to standby mode again, be
sure to turn off the equipment and press SYNCHRO
REC, before Synchro-Rec starts.
• The Synchro-Rec function does not work with some
tuners. For details, see the tuner's operating
instructions.
• The Synchro-Rec function does not work for a vide()
signal input via the LINE 1 IN S VIDEO jack.
• After a recording has finished, the recorder enters the
Synchro-Rec standby mode until the SYNC-REC
indicator turns off in the front panel display.
• If Synchro-Rec starts with the recorder turned on, the
recorder will turn off when the recording ends.
• The recorder does not record programs with Copy-
Never signals. Such recordings stop afler a few
seconds.
g
55 us