Video Settings (Video) - Sony RDR-VX560 Operating Instructions Manual

16:9
Video Settings (Video)
The "Video" setup allows you to adjust items
related to the image, such as size and color.
Choose the settings according to the type of TV,
tuner, or decoder connected to the recorder.
1
2
3
PressSYSTEM MENU whiletherecorder i s
in stopmode.
Select "Setup," andpress ENTER.
Select"Video," andpressENTER.
The "Video" setup appears with the followiug
optious. The default settiugs are uuderliued.
10:10 AM
: 4:3 Letter Box
: Auto
: YCbCr
: On
: Standard
: Off
: Composite
TVType
Selects the aspect ratio of the couuected TV (4:3
staudard or wide).
16:9
4:3 Letter
Box
4:3 Pan
Scan
Select this when connecting to a
wide-screen TV or TV with a
wide mode function.
Select this when connecting to a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the screen.
Select this when connecting to a
4:3 screen TV. Automatically
displays a wide picture on the
entire screen and cuts off the
portions that do not fit.
4:3 Letter Box
4:3 Pan Scan
Depending on 1he disc, "4:3 Letler Box" may be selecled
automatically instead of "4:3 Pan Scan" or vice versa.
Resolution (HDMI)
Selects the type of video signals output from the
HDMI OUT jack. When you select "Auto"
(default), the recorder outputs video signals of the
highest resolution acceptable for your TV. If the
picture is not clear, unnatural or not to your
satisfaction, try another option that suits the disc
and your TV/projector, etc. For details, refer also
to the instruction manual supplied with the TV/
projector, etc.
The setting is effective only when you connect a
HDMI equipped TV to the HDMI OUT jack.
Auto
1920x108Op
1920x1080i
1280x72Op
720x48Op
Normally, select this.
Sends 1920x1080p video signals.
Sends 1920x1080i video signals.
Sends 1280x720p video signals.
Sends 720x480p video signals.
Video(HDMI)
Selects the type of output fi'om the HDMI OUT
jack.
The setting is effective only when you connect a
HDMI equipped TV to the HDMI OUT jack.
Y Cb Cr Normally, select this when
connecting to an HDMI device.
RGB
Outputs RGB signals. Select this
if the playback picture becomes
distorted when you select "Y Cb
Cr."
98.s