Kyocera TASKalfa 2550ci User Manual page 24

Printer driver
Hide thumbs Also See for TASKalfa 2550ci:
Table of Contents

Advertisement

Device Settings
SNMPv3 Options
Selecting SNMP Settings
1
2
3
4
5
6
2-6
This option displays a list of installed printing systems to apply the selected
settings.
You can select options for secure communication with the printing system.
Authentication
This option provides an algorithm to check that a transferred file has arrived
intact. Message Digest 5 (MD5) and Secure Hash Algorithm 1 (SHA1) are hash
algorithms used to authenticate packet data.
MD5
This option provides a cryptographic hash function with a 128 bit hash value.
It adds security and protection against Gateway Load Balancing Protocol
(GLBP)-spoofing software.
SHA1
This option produces a message digest that is 160 bits long. SHA1 is the
successor to MD5.
Privacy
This option uses encryption for secure communication. It is available after you
select the Authentication option. You may select one Privacy option.
DES
This option uses the Data Encryption Standard for encryption. DES turns
cleartext into ciphertext via an encryption algorithm. It encrypts and decrypts
data using 8-byte blocks and a 56-bit key.
AES
This option uses the Advanced Encryption Standard for encryption. AES is a
symmetric block cipher that can process data blocks of 128 bits, using cipher
keys with lengths of 128, 192, and 256 bits. It is more secure than DES.
These settings in the driver must be set to match the settings in the printing
system's Command Center RX.
In Device Settings > Administrator > General, click SNMP Settings.
Select SNMPv1/v2c or SNMPv3.
For SNMPv1/v2c, type the Read community name and Write community
name, to a maximum of 32 characters, and click OK.
For SNMPv3, type a User name to a maximum of 32 characters, and a
Password from 8 to 32 characters.
To set authentication and privacy options for SNMPv3, click Settings.
In the dialog box, select from the available options.
Click OK.
Optional: Under Apply to other models, you can select from the list of
available models. You can also click Select All or Clear All. The SNMP settings
are applied to all selected models.
User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents