Set Server Parameter Values - Vivotek IP7139 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
\r\n
network.ipaddress=192.168.0.123\r\n

Set server parameter values

Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/anonymous/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>][&return=<return page>]
http://<servername>/cgi-bin/viewer/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/operator/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/admin/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
PARAMETER
<group>_<name> value to assigned Assign <value> to the parameter <group>_<name>
update
return
72 - User's Manual
VALUE DESCRIPTION
<boolean> set to 1 to actually update all fields (no need to use
update parameter in each group)
<return page> Redirect to the page <return page> after the
parameter is assigned. The <return page> can be a
full URL path or relative path according the the current
path. If you omit this parameter, it will redirect to an
empty page.
(note: The return page can be a general HTML
- 63 -
www.vivotek.com