Tipping Radius; Door Swing Dimensions; Cabinet And Panel Installation Options - Jenn-Air JS42NXFXDW00 Installation Manual

Tipping Radius

Be sure there is adequate ceiling height to stand the refrigerator
upright when it is moved into place.
The dolly wheel height must be added to the tipping radius
when a dolly is used.
If needed, the tipping radius can be reduced. See "Reduce
Tipping Radius."
Side Tipping Radius
The side tipping radius varies depending upon the width of the
model. Use the chart provided to determine the side tipping
radius.
NOTE: Tip on side only.
A
Model
42
48

Door Swing Dimensions

The location must permit both doors to open to a minimum of 90°.
Allow 4 " (11.4 cm) minimum space between the side of the
refrigerator and a corner wall.
NOTE: More clearance may be required if you are using overlay
panels, custom handles, or extended handles.
A B
90˚
110˚
Model A
42 40 " 39 "
(103.5 cm) (101.0 cm)
48 43 " 42"
(109.9 cm) (106.7 cm)
8
Tipping Radius A
91 " (232.1 cm)
94 " (239.7 cm)
90˚
110˚
B C
" 46 "
(115.3 cm) (118.8 cm)
" 50 "
(123.5 cm) (127.6 cm)

Cabinet and Panel Installation Options

Cabinet Depth - 25" (63.5 cm)
Framed Cabinetry
Top View - Overlay
A. Refrigerator door
B. Overlay panel
C. Side trim
Top View - Inset
A. Refrigerator door
B. Overlay panel
C. Side trim
Frameless Cabinetry
C D
D
A. Refrigerator door
B. Overlay panel
C. Side trim
A B
D. Adjacent cabinet
E. Grille bracket
E
D
C
A B
D. Adjacent cabinet
E. Grille bracket
A B
D. Adjacent cabinet
E. Grille bracket
E
D
C
E
D
C