Printing All Photos - Epson PictureMate Flash PM 280 Basics Manual

3
To print more than one copy, press OK to increase
the number of copies.
(Press Copy - to decrease the number using the
left selection button under the photo viewer
screen.)
4
To select more photos, press l or r to view a
photo and press OK to select it. Repeat step 3 to
select more copies, if necessary.
5
To preview your photos, press Print Preview. (Or
skip directly to step 7 to print your photos.)
Press l or r to review your selected photos. If you
change your mind, press the Back button.
6
Press Layout to select the layout of your photos
on the paper. (See page 16.)
7
Make sure you have enough paper loaded, then
press Print to start printing.
Tip: You can check the total number of prints at the top
of the screen before printing.
10

Printing All Photos

You can print all the photos on your camera's memory
card, and select the number of copies to print of each
photo.
1
After inserting a card, press Select All. (Select All is
the left selection button under the photo viewer
screen.)
Press here
to choose
Select All
The selected photos are highlighted orange.
2
If you want more than one copy of each picture,
press OK to increase the number of copies of all
the selected photos.