Epson PictureMate Flash PM 280 Basics Manual page 23

5
Select Brightness, Saturation, or Sharpness, then
press OK. You see your photo next to the menu:
6
Press u or d to increase or decrease the setting.
You can see the changes on your photo.
7
When the photo looks good, press OK.
8
At the next screen, select whether to apply the
setting to the current photo or all photos, then
press OK.
9
Repeat steps 3 through 8 to make other
adjustments to the same photo, if necessary. Or
repeat steps 1 through 8 to fix more photos.
10
Press OK to select the current photo for printing.
(See page 9.) Or you can print all photos
(page 10) or a range of photos (page 11).
22
11
Adjust any other settings you want, then press
Print to print your photos.
Adding Frames to Your Photos
PictureMate includes frames that you can add to your
photos, including a variety of Disney character frames.
Note: Additional frames are included on the PictureMate CD
that came with your printer. See the on-screen User's Guide for
instructions on adding them to PictureMate.
1
Select a photo that you want to place in a frame.
2
Press Menu.
3
Press u or d to highlight Frame, then press OK.
4
Press u or d to highlight Add Frame to Photo,
then press OK. You see a selection of frames: