Inserting Your Memory Card - Epson PictureMate Flash PM 280 Basics Manual

4
Slide the edge guides outward.
5
Create a stack of up to 20 sheets of paper and
separate the sheets slightly by fanning them.
6
Place your paper into the slot between the edge
guides with the glossy or whiter side up. Slide the
edge guides inward slightly.
6
7
Note:
Series Print Pack. See page 48 for more information.

Inserting Your Memory Card

1
2
3
Load glossy or
whiter side up
4
Make sure paper
is beneath arrow
on edge guides
Note: Load a maximum of 20 sheets at a time. Load
your paper glossy or whiter side up to prevent smearing.
Store any unused paper in the original package
and keep it flat in a dry area to prevent curling.
When you need more paper, order a PictureMate 200
Press the On button to turn on PictureMate.
Press the Open button to open the output tray, if
necessary.
Insert the memory card into the correct slot, as
shown on the next page. Insert just one card at a
time.
Note: PictureMate can't read multiple cards at once.
Push the card in carefully until it stops (it won't go
in all the way).
When the card is in, the memory card light comes
on and begins to flash.
Caution: Do not remove a card while the memory card
light is flashing; you may lose photos on your card.