Epson Stylus Photo 895 Daily Use page 61

5. Select the number of the filter you want to use. The table below
lists the filter numbers and their effects. Also refer to the color
pages at the end of this guide for the examples of filter effects.
No.
0
1
2
3
4
Note:
If you select All or Set for the Print Mode setting and want to use
a filter effect on all of the selected photographs, press and hold the
Brightness button for 3 seconds. ALL appears on the Select Photo
menu and the Filter icon stops flashing. The filter is applied to all
photographs. To clear the filter setting, press the Cancel button.
6. Press the Brightness button to select the filter effect. The Filter
icon stops flashing.
7. When you select All or Set for the Print Mode setting, repeat
the steps 3 to 5 to make filter settings for each photograph. To
clear the each filter setting, select 0 (No effect) for the filter
number. To clear all of filter settings, press the Cancel
button.
8. Press Start to start printing.
To turn off filter effects, press the Cancel button.
56
Effect
Off
Monochrome
Sepia
High contrast
Slightly brighter
No. Effect
5 Brighter
6 Slightly darker
7 Darker
8 Vivid
9 Sharp