When Choosing A Place For The Printer - Epson Stylus Photo 895 Daily Use

Do not attempt to service the printer yourself.
Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the
printer; the printer has been dropped or the cabinet damaged;
the printer does not operate normally or exhibits a distinct
change in performance.
If you plan to use the printer in Germany, the building
installation must be protected by a 10 or 16 amp circuit
breaker to provide adequate short-circuit protection and
over-current protection for this printer.

When choosing a place for the printer

Observe the following when choosing a place for the printer:
Place the printer on a flat, stable surface that extends beyond
the printer base in all directions. The printer will not operate
properly if it is tilted or at an angle.
Leave enough space in front of the printer for the paper to be
fully ejected.
Avoid places subject to rapid changes in temperature and
humidity. Also, keep the printer away from direct sunlight,
strong light, or heat sources.
Avoid places subject to dust, shocks, and vibrations.
Leave enough room around the printer to allow for sufficient
ventilation.
Place the printer near a wall outlet where the plug can be
easily unplugged.
2