Epson PhotoPC P-1000 User Manual page 25

Setting the language
When you turn on PhotoPC P-1000 the first time, the
language setting screen is displayed. Select the
language you want to use with the Four-way button,
and press the OK button.
Language Setting
Language
Deutsch
Espanol
Press OK to select and return to the previous screen. Press
cancel to disregard the selection.
Setting the date and time
When you turn on PhotoPC P-1000 for the first time,
the Date and Time Settings screen is displayed after
you select the language. Set the date and time.
Note:
❏
If you remove the battery from PhotoPC P-1000, the
date and time settings will be erased after
approximately two days maximum after the last time
to used P-1000.
English
Fran ais
Italiano
Portugues
❏
After changing the battery, make sure that the date and
time is set correctly. If necessary, set the date and time
again.
❏
You can change the settings later. See "Changing
PhotoPC P-1000 Settings" on page 48 for details about
setting the date and time settings.
1. Turn the power on. The Date and Time Settings
screen appears.
Date and Time Settings
Year: Month:
2003 01
Hour: Minute:
12 00
Use the up or down button to select the year. Press OK to
apply the setting.
2. Press the UP and Down buttons on the control
panel to change the value of the selected item.
3. After you finish making settings, select a different
item by pressing the Right and Left buttons on the
control panel.
Day:
01
Format:
YYYY.MM.DD
19
Getting Started
2
2
2
2
2
2
2
2
2
2