Before Use - Panasonic SDR-SW20 RED Operating Instructions Manual

Before use

Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (figures A
and B).
Confirm the AC mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1) Open the fuse cover with a
screwdriver.
Figure A
EMC Electric and magnetic compatibility
This symbol (CE) is located on the rating plate. (EB/EP only)
IF THE POWER CORD OF THIS EQUIPMENT IS DAMAGED, IT MUST BE
REPLACED WITH AN ELECTRICALLY APPROVED POWER CORD.
Use only the recommended accessories.
● Do not use any other AV cables and USB connection cables except the
supplied one.
● When you use the cable which are sold separately, please make sure to use
the one whose length is less than 3 m.
● Keep the Memory Card out of reach of children to prevent swallowing.
How to replace the Fuse(Only for Hong Kong Special
Administrative Region of China and Saudi Arabia)
The location of the fuse differ according to the type of AC mains plug
(figures A and B).Confirm the AC mains plug fitted and follow the
instructions below.Illustrations may differ from actual AC mains plug.
1) Open the fuse cover with a
screwdriver.
Figure A
Figure B
Fuse cover
Figure B
Fuse cover
2) Replace the fuse and close or
attach the fuse cover.
Figure A
Fuse
(5 ampere)
2) Replace the fuse and close or
attach the fuse cover.
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
VQT1M34
3