Table of Contents
Advertisement
ESC *
Format:
ASCII code:
Decimal :
Hexadecimal: 1B
Comments:
Turns on graphics mode m. See Chapter 8 for details on the 7 modes
available.
If d is the total number of dots required,
nl = d MOD 256
n2 = INT(d / 256)
This command must be followed by d data numbers.
ESC ?
Format:
ASCII code:
Decimal:
Hexadecimal :
Comments:
Changes one graphics mode to another. The variable s is a character
K, L, Y, or Z, which is reassigned to a mode O-6.
ESC ^
Format:
ASCII code:
Decimal:
Hexadecimal :
Comments:
Turns on 9-pin graphics mode. Where m defines density of print (0
for single and 1 for double) and d is the total number of dots
required nl and n2 are as below:
nl = d MOD 256 and n2 = INT(d / 256)
and are followed by two times d data bytes. The printer expects two
data items for each column of print.
ESC
*
27
42
2A
?
ESC
27
63
3F
1B
ESC
^
27
94 (m) (n1) (n2)
1B
5E (m) (n1) (n2)
Select Graphics Mode
(m)
(n1)
(m)
(n1)
(m)
(n1)
Reassign Graphics Mode
(s)
(n)
(s)
(n)
(s)
(n)
Select 9-Pin Graphics Mode
(m)
(n1)
(n2)
(n2)
(n2)
(n2)
c-21
Advertisement
Table of Contents
