Table of Contents
Advertisement
Control Panel
After connecting your LX-90 to your computer, turn on the printer
and look at the control panel, which is shown in Figure
I
You have already used the control panel for a special purpose,
printing the self test. Here are the main functions of the lights and
buttons on this panel:
The POWER light glows green when the power is on.
l
The READY light glows green when the printer is ready to accept
l
data. Don't worry if this light flickers somewhat during printing;
this flickering is normal.
The PAPER OUT light glows red when the printer is out of paper or
l
the paper is loaded incorrectly.
The ON LINE light glows green when the printer can receive data.
l
In addition to the lights, the control panel has three buttons.
ON LINE-switches the printer between on line and off line status.
l
When the printer is on line, the ON LINE light glows and the printer
is ready to accept data.
6
Figure 7-4. Control panel
l-4.
Advertisement
Table of Contents
