Table of Contents
Advertisement
Tabs
HT
Format:
ASCII code:
Decimal:
Hexadecimal: 09
Control:
Comments:
Advances the print position to the next horizontal tab setting.
ESC D
Format:
ASCII code:
Decimal:
Hexadecimal: 1B
Comments:
This command allows setting of up to 32 horizontal tabs. These are
entered as nl, n2, n3 etc. (in the range 1 to 255) with ASCII 0 as the
terminator. The tab settings nl, n2, n3 etc. must be entered in
ascending order. If nl = 0, all tabs are cleared. The settings on
power up or after an ESC @ command are every eight characters.
VT
Format:
ASCII code: VT
Decimal:
Hexadecimal:
Control:
Comments:
Advances the paper to the next tab setting in the channel selected by
ESC /. If no channel has been selected, channel 0 is used. If no
vertical tabs have been selected, the paper advances one line.
C-16
H T
9
CTRL I
ESC
D
68
27
44
11
0B
CTRL K
Tab Horizontally
Set Horizontal Tabs
(n1)
(n2)
(n1)
(n2)
(n1)
(n2)
...
0
...
0
...
00
Tab Vertically
Advertisement
Table of Contents
