6.
Click Continue to proceed or Cancel to exit the procedure.
The Code Load Storage System – Page 1 window
Check the box "I have completed the storage system and SAN checks outlined in the HP
StorageWorks Enterprise Virtual Array Updating Product Software Guide for my storage system
version." and click Next Step (which is disabled if the box is not checked).
7.
Figure 16 Code Load Storage System — Page 1 window
8.
If your drive-addition policy is set to Automatic, respond to the following message:
9.
If your drive-addition policy cannot be determined, respond to the following message:
10. The Code Load Storage System — Page 2 window opens.
(Figure 16 (page
47)) opens.
Step 5. Upgrading the controller software
47