Switching Back To Single Sheets; Printing With The Pull Tractor - Epson LX-300+ User Manual

Switching back to single sheets

To switch to single sheets, press the Load/Eject button; the
printer feeds the paper backwards into the standby position.
Then, follow the steps in "Loading single sheets" on page 2-20.
Caution:
c
Always tear off your printed document before you press the
Load/Eject button. Reverse feeding several pages at a time may
cause a paper jam.

Printing with the pull tractor

To load continuous paper using the pull tractor, you must move
the tractor to the pull tractor position, as described in steps 1
through 3 below. If your tractor is already installed in this
position, make sure the printer is off and skip to step 6.
Caution:
c
2-10
Using the Printer
Use the knob on the left side of the printer only to clear paper
jams and only when the printer is off. Otherwise, you may
damage the printer or cause it to lose the top-of-form position.
When using the pull tractor, set the Auto tear off feature in
the Printer Setting mode to off; otherwise the paper may jam.