Epson LX-300+ User Manual page 60

Auto tear off
When auto tear off is on and you are using continuous paper with
the push tractor, the printer automatically advances the paper
perforation to the tear-off position, where you can easily tear off
the printed pages. When the printer receives the next print job, it
automatically moves the unused paper back to the top-of-form
position and starts printing, so you can use all of the next page.
When auto tear off is off, you need to move the perforation to the
tear-off position manually by pressing the Tear Off button. See
"Advancing the paper to the tear-off edge" on page 2-17 for more
information.
Auto line feed
When auto line feed is on, the printer accompanies each carriage
return (CR) code received with a line feed code. When this feature
is on, the print position moves to the next line. If the printer adds
an extra line after every carriage return, select Off.
Print direction
You can select bidirectional printing (Bi-D) or unidirectional
printing (Uni-D). Printing is normally bidirectional; however,
unidirectional printing allows for precise vertical printing
alignment, which is useful for printing graphics.
Software
When you select ESC/P, the printer operates in the EPSON
ESC/P mode. When you select IBM 2380 Plus, the printer
emulates an IBM printer.
0 slash
The zero character has a slash ( ) when this feature is on. It has no
slash (0) when this feature is off. The slash allows you to easily
distinguish between the uppercase letter "O" and a zero.
0
Using the Printer
2
2-27