Printer Settings - Epson LX-300 User Manual

Printer Settings

The table below lists the printer settings that you can change from the
control panel. Underlined options indicate the factory default settings that
take effect when the printer is initialized (some factory default settings
may vary by country). To change a setting, see "Changing the Printer
Settings" in Chapter 2.
Function
Character spacing
Shape of zero
1 inch skip-over-perforation
Character table
Auto line feed
Page length
Auto tear off
Tractor
Interface
Serial I/F bit rate
Serial I/F parity bit
Serial I/F data length
Serial I/F ETX/ACK
Software
Auto carriage return
Options
10 cpi, 12 cpi
0, 0 (with slash)
On, Off
US model:
USA Italic, France Italic, Germany Italic,
UK Italic, Denmark Italic, Sweden Italic,
Italy Italic, Spain 1 Italic, PC437, 850, 860,
861, 863, 865, BRASCII, Abicomp
All other models:
USA Italic, France Italic, Germany Italic,
UK Italic, Denmark Italic, Sweden Italic,
Italy Italic, Spain 1 Italic, PC437, 850, 852,
853, 855, 857, 866, 869, 437 Greek, ISO
Latin 1T, ISO 8859-7 Code MJK, Mazovia,
Bulgaria
On, Off
11, 12, 8.5, 70/6, 5.5, 7, 17, 14, 8, 6, 4, 3.5, 3
inches
On, Off
Single, Double
Auto (10 sec. wait), Auto (30 sec. wait),
Parallel, Serial
300, 600, 1200, 2400, 4800, 9600, 19200 bps
None, Odd, Even
7 bit, 8 bit
Disable, Enable
ESC/P, IBM 2380
On, Off
A-9
Appendix