Using The Control Panel; Lights And Buttons - Epson LX-300 User Manual

Using the Control Panel

Draft Condensed
You can control simple printer operations—such as line feeding,
form feeding, loading and ejecting paper, and selecting
fonts—with the buttons on the control panel. The control panel
lights show the printer's status and the current font.

Lights and buttons

PAUSE light
The orange PAUSE light is on when the printer stops printing.
Each time you turn on the printer, the light flashes briefly and the
beeper sounds four times. When the printer is out of paper, the
light flashes and the beeper sounds three times. The light also
flashes when you can tear off the last sheet at the edge of the
printer cover.
The PAUSE light goes on and the beeper sounds five times if an
error occurs.
FONT 1 and FONT 2 lights
The green FONT lights, 1 and 2, indicate the current font setting.
For more about selecting fonts, see page 2-4.
FONT button
Press the FONT button during normal operation to cycle through
the printer fonts listed on the control panel. When you press the
button, the FONT lights change to indicate your current selection.
For more about choosing a font, see page 2-4.
2-2
Using the Printer
Roman
Sans Serif
D r a f t
1 2
Micro Adjust
Font LF/FF
Paper Park
Pause
3sec