Epson LX 300+II Reference Manual page 83

Printed characters are not what you expected
The typestyles or characters you sent with your software did
not print.
Cause
The software may not be
properly configured.
The font selected on the control panel does not print.
Cause
Your software may be
overriding your control
panel setting.
The print position is not what you expected
Printing starts too high or too low on the page, or the bottom
part of one page is printed at the top of the next page.
Cause
Your application software
settings may be incorrect.
Page length does not match the length of the paper.
Cause
The page length setting in
your application may be
incorrect.
What to do
Check that the software is correctly
configured for your printer.
What to do
Check the font setting in your
application software.
What to do
Check the margin or top-of-form
position setting in your application
software.
What to do
Check the page length set by your
application software and adjust it if
necessary.
Maintenance and Troubleshooting
83