Printing On Single Sheets - Epson LX 300+II Reference Manual

5. After you set the tear-off position, press the Pause button to
exit Micro Adjust mode.
6. Tear off the printed pages.
When you resume printing, the printer automatically feeds the
paper back to the top-of-form position and begins printing.
Note:
Your tear-off position setting remains in effect until you change it,
even if you turn off the printer. (If you want to restore the printer's
default tear-off position, you can reset the printer. See page 73 for
instructions.)

Printing on Single Sheets

You can load single sheets of paper one at a time using the
printer's paper guide.
Before printing on single-sheet multipart forms, envelopes, or
other special paper, make sure the paper thickness lever is set to
the correct position. See "Printing on Special Paper" on page 29.
Note:
❏ Load only one sheet at a time.
❏ To load a stack of single-sheet paper, use the optional cut-sheet
feeder. (See page 98 for more information.)
❏ For detailed specifications on the types of single-sheet paper you
can use, see page 115.
❏ You can use the paper guide to load single-sheet carbonless
multipart forms that are fastened at the top by line gluing.
❏ Insert multipart forms in the paper guide, bound edge first and
printable side down.
26
Paper Handling