Epson LX 300+II Reference Manual page 64

2 Tear Off (Font) button
❏ Advances continuous paper to the tear-off position.
❏ Feeds continuous paper backward from the tear-off
position to the top-of-form position.
❏ In Micro Adjust mode, selects one of the six built-in fonts.
3 LF/FF button
❏ Feeds paper line by line when pressed and released.
❏ Ejects a single sheet or advances continuous paper to the
next top-of-form position when held down.
❏ In Micro Adjust mode, adjusts the top-of-form and tear-
off position.
4 Load/Eject button
❏ Loads a single sheet of paper.
❏ Ejects a single sheet of paper.
❏ Loads continuous paper from the standby position.
❏ Feeds continuous paper backward to the standby
position.
❏ In Micro Adjust mode, adjust the top-of-form and tear-off
position.
5 Pause button
Stops printing temporarily, and resumes printing when
pressed again. When held down for three seconds, turns on
Micro Adjust mode. To turn it off, press it again.
64
Using the Control Panel