When Setting Up The Printer - Epson LX 300+II Reference Manual

When setting up the printer

❏ Do not place the printer on an unstable surface or near a
radiator or heat source.
❏ Place the printer on a flat, stable surface. It will not operate
properly if it is tilted or placed at an angle.
❏ Do not place the printer on a soft surface like a bed or a sofa,
or a small, enclosed area, as this restricts ventilation.
❏ Do not block or cover the slots and openings in the printer's
cabinet, and do not insert objects through the slots.
❏ Use only the type of power source indicated on the printer's
label. If you are not sure of the power supply specifications
in your area, contact your local power company or consult
your Epson reseller.
❏ Connect all equipment to properly grounded electrical
outlets. Avoid using outlets on the same circuit as
photocopiers or air control systems that regularly switch on
and off.
❏ Do not use a damaged or frayed power cord.
❏ The power cord should be placed to avoid abrasions, cuts,
fraying, crimping, kinking, and other damage.
❏ If you use an extension cord with the printer, make sure the
total ampere rating of all devices plugged into the extension
cord does not exceed the cord's ampere rating. Also, make
sure the total ampere of all devices plugged into the
electrical outlet does not exceed the electrical outlet's
ampere rating.
❏ Use only the power cord that comes with this product. Use
of another cord may result in fire or electric shock.
8
Introduction