Envelopes - Epson LQ-850 User Manual

Never feed the labels backward through the printer.
Labels can easily come off the backing and jam the
printer. Also, never use the
labels or to feed labels backward to the standby position.
If a label does become stuck in the printer mechanism,
refer the problem to your dealer. Since labels are
especially sensitive to temperature and humidity, always
use them under normal operating conditions.

Envelopes

With the optional cut sheet feeder installed, you can print on a
variety of envelopes, including air mail, plain, or bond. See the
section on the cut sheet feeder in Chapter 7. Before loading
envelopes into the cut sheet feeder, you need to adjust the paper
thickness lever. See the table showing envelope types and
recommended lever positions on page 2-17.
You can also feed envelopes individually, using the single sheet
loading feature. First, set the paper-thickness lever as indicated in
the table on page 2-17. Then, follow the single sheet loading
instructions at the beginning of this chapter. Because of the
thickness of envelopes, however, you may have to press down
slightly on the envelope at the same time you press the
button.
Printing on Special Paper
LOAD/EJECT
button to eject
LOAD/EJECT
2-19