Choosing A Character Table - Epson LQ-850 User Manual

Choosing a character table

DIP switch l-4 selects the italics character table or the Epson
Extended Graphics character table. The Epson Extended Graphics
character table contains international accented characters, Greek
characters, and character graphics for printing lines, corners, and
shaded areas. Since the character table setting affects only the upper
half of the character table, you can still print text if you have
selected the Extended Graphics set. Also, you can still print italics if
you use the proper software command.
To change the setting of a DIP switch, first turn off the printer.
Then change the DIP switch, and turn the printer back on.
Turning DIP switch 1-4 on selects the Epson Extended Graphics
character table; turning l-4 off selects the italics table.
The tables on the following pages show what characters are
printed in each of the character tables. The values across the top of
the tables are the first hexadecimal value of the two-digit code for
each character, and the values down the left side of the table are
the second hexadecimal value.
setting ChalWAer sets
3-21