Canon imageCLASS MF5550 Facsimile Manual page 51

2
Adjust any necessary settings for your document.
•
Press [Image Quality] to select the fax resolution. (See "Adjusting the Image Quality
(Fax Resolution)," on p. 4-5.)
•
Press [Exposure] to select the scan density. (See "Adjusting the Exposure (Scan
Density)," on p. 4-6.)
3
Enter the fax/telephone numbers you want to send to.
● To use one-touch speed dialing:
❑
Press the one-touch speed dialing key(s).
● To use coded speed dialing:
❑
Press [Coded Dial] ➞ use the numeric keys to enter the two-digit code.
NOTE
Repeat step above to enter the other codes if necessary.
● To use regular dialing:
❑
Use the numeric keys to enter the fax/telephone number ➞ press [Set].
To review the numbers you have entered, press [ ] or [ ].
4
Press [Start].
If you are using the platen glass, you will be prompted when the page has been
scanned. Place the next page (for a multipage document) ➞ press [Start]. To start
sending, press [Set].
NOTE
•
Only one broadcasting job will be active at any given time.
To cancel sending, press [Stop/Reset] ➞ follow the instructions in the LCD. When you
•
press [Stop/Reset], sending to all recipients will be canceled. You cannot cancel sending
to only one recipient. (See Chapter 7, "System Monitor," in the Basic Guide.)
Sending the Same Document to Several Recipients (Sequential Broadcasting)
4
4-13