Adjusting the Exposure (Scan Density)
Density is the degree of differences between light and dark areas of an image. The
<DARK> setting will make an image darker, whereas the <LIGHT> setting will make
it lighter.
Follow the procedure of "Sending Methods" (see p. 4-1), and adjust the density as
follows when required to do so:
1
Press [Exposure].
2
Press [ ] or [ ] to select the density ➞ press [Set].
4
Ex:
You can select from the following:
- <STANDARD> for standard documents
- <DARK> for light documents to be darker
- <LIGHT> for dark documents to be lighter
4-6
Improving Faxed Images
S C A N D E N S I T Y
Ex:
1 2 / 0 3 / 2 0 0 3 W E D 1 5 : 1 0
➞
D A R K
F a x O n l y
F I N E