Other Codes - Epson LQ-800 User Manual

Other Codes

BEL
Format:
ASCII code:
Decimal:
Hexadecimal: 07
Control:
Comments:
Sounds the LQ beeper for
BS
Format:
ASCII code: B S
Decimal :
Hexadecimal: 08
Control:
Comments:
Prints out data in the print buffer, then moves the print position one
space to the left. If this code is received immediately after graphics
printing, the print position of subsequent data is moved back to the
point at which graphics printing started. This command should not
be used in proportional mode. For accurate positioning, use the
ESCape "\" command.
CR
Format:
ASCII code: C R
Decimal:
Hexadecimal: 0D
Control:
Comments:
Returns the print position to the left margin without advancing the
paper. If DIP switch 2-8
carriage return.
B E L
7
CTRL G
0.1
8
CTRL
H
13
CTRL M
is ON, the LQ will add a line feed to the
seconds.
Beeper
Backspace
Carriage Return
I-27