Power Supply - Epson LQ-570 User Manual

Power Supply

Power is not being supplied.
The
OPERATE
l
Check that the power cord is plugged into the electrical
outlet properly.
If the electrical outlet is controlled by an outside switch or
automatic timer, use a different outlet.
Plug another electrical device into the outlet to determine
whether the outlet is operating properly.
The OPERATE light comes on briefly and then goes
l
off
stays
Check that the printer's voltage rating matches the voltage of
your electrical outlet. If the voltages do not match, unplug
the printer and contact your dealer immediately. Do
reconnect the power cord to an electrical outlet.
light does not go on.
even when the power is switched on again.
off.
The light
not
Troubleshooting 6-3