Advertisement
Dial Mode (Australia Only)
Your phone can communicate with the telephone network in two
different ways: tone dialing and pulse dialing. These days, most
phone networks use a method called tone dialing, so your phone
comes programmed for tone dialing.
Dial Mode
If your phone company uses
your phone's dial mode. There's an easy way to tell: try making a
call. If your call connects, your phone's setting is fine. If not,
go to
you've changed the dial mode, and you can try making a call
again.
Name Tag (POP ID)
Name Tag
If you subscribe to a Caller ID service your phone can display the
stored name with the Caller ID telephone number, if the displayed
(Default is on) Caller ID telephone number is exactly the same as a
number stored in the phone book (see page 46).
Insert 0
Insert
This feature adds ' ' or '
messages (see page 46). The default setting for New Zealand is On.
The default setting for Australia is Off.
and select
D i a l M o d e
0
0
00
dialing, you'll need to change
p u l s e
. A confirmation tone tells you
P u l s e
' to the number, when you receive Caller ID
Advertisement
