Download Print this page

Muting The Beep Tones; Playing Back Images - Olympus CAMEDIA C-2 Quick Start Manual

Hide thumbs Also See for CAMEDIA C-2:

Advertisement

I
SEQUENCE MODE (
)
1 Press the
button with the lens barrier open to display the Camera menu.
2 Select [CAMERA] using the
3 Select [DRIVE] using the
/
4 Select [
SEQUENCE] using the
5 Press the
button again to exit the menu.
6 Take pictures. (Picture-taking continues while the shutter button is pressed and stops
when the button is released.)
I
EXPOSURE COMPENSATION
This mode enables you to change the brightness of the image. (Compensation of ±2 in
0.5 steps)
1 Press the
button with the lens barrier open to display the Camera menu.
2 Select [CAMERA] using the
3 Select [
] using the
/
4 Adjust the compensation using the
(to brighten image), and press the
5 Press the
button again to exit the menu.
6 Take a picture.
I
METERING MODE (
1 Press the
button with the lens barrier open to display the Camera menu.
2 Select [CAMERA] using the
3 Select [
] using the
/
4 Select the Metering mode setting using the
5 Press the
button again to exit the menu.
6 Take a picture.
Metering mode settings
Note
ESP (
)
The camera measures the light at the center of the
viewfinder and around the periphery of the picture
separately and then selects the optimal exposure.
SPOT (
)
The camera measures the light levels only at the center
of the viewfinder, allowing you to obtain the correct
exposure for backlight subjects since the exposure is not
affected by the background light.
I
WHITE BALANCE (
1 Press the
button with the lens barrier open to display the Camera menu.
2 Select [PICTURE] using the
3 Select [
] using the
/
4 Select the white balance setting using the
5 Press the
button again to exit the menu.
6 Take a picture.
White balance settings
Note
Auto (AUTO)
Clear sky (
)
Cloudy sky (
)
Incandescent Lamp (
) Under incandescent lighting.
Fluorescent Lamp (
) Under fluorescent lighting.
I
IMAGE QUALITY (SHQ, HQ, SQ1, SQ2)
1 Press the
button with the lens barrier open to display the Camera menu.
2 Select [PICTURE] using the
3 Select [
] using the
/
4 Select the image quality setting using the
5 Press the
button again to exit the menu.
6 Take a picture.
Image quality settings (pixel size)
Note
SHQ (1600 × 1208)
For best print quality.
HQ (1600 × 1200)
For good print quality with small print size.
SQ1 (1024 × 768)
For e-mail attachments or small print size.
SQ2 (640 × 480)
For e-mail or web use.
I PLAYING BACK IMAGES
To turn the monitor on : Press the
To turn the monitor off : Press the
button : Displays the previous image.
Note
button : Displays the next image.
button : Displays several images. Press the
image.
If you press the
moves to the previous image, and if you press the
to the next image.
button : Magnifies the image (1.5× → 2× → 2.5× → 3×). Press the
to return to 1×.
If you press the
is enabled.
Press the
or right.
Press the
/
buttons and press the
button.
buttons and press the
button.
/
buttons and press the
/
buttons and press the
button.
buttons and press the
button.
button (to darken image) and the
button.
)
/
buttons and press the
button.
buttons and press the
button.
/
buttons and press the
)
/
buttons and press the
button.
buttons and press the
button.
/
buttons and press the
The white balance is controlled automatically.
In outdoors under a clear sky.
In outdoors under a cloudy sky.
/
buttons and press the
button.
buttons and press the
button.
/
buttons and press the
button with the lens barrier closed to turn the monitor on.
button again to turn the monitor off.
button to return to display an
button in the index playback, the green frame
button while magnifying the image, scroll mode
/
/
/
buttons to move the image up, down, left
button again to exit scroll mode.
I
ERASING AN IMAGE
1 Display the image you want to erase.
2 Press the
3 Select [
The selected image is erased.
button.
I
ERASING ALL IMAGES
1 Press the
2 Press the
3 Select [SETUP] using the
4 Select [
5 Select [
6 Select [
All the images are erased.
Once erased, images cannot be restored. Check the image before erasing to avoid
button
accidentally erasing image you want to keep.
Caution
I
PROTECT (
1 Display the image you want to protect.
2 Press the
Protected images cannot be erased by "Erasing an image" or "Erasing all images",
but they are erased by formatting the card.
Caution
To cancel the protect setting, display the image with the
Note
button.
I RECORDING/PLAYING BACK MOVIES ( )
Recording movies
1 Press the
2 Select [CAMERA] using the
3 Select [DRIVE] using the
4 Select [
5 Press the
6 Record movies by looking at the monitor. (Press the shutter button to start recording
movies. Recording stops when the shutter button is pressed again.)
The movie mode is cancelled when the monitor is turned off by pressing the
Note
button.
Playing back movies
1 Press the
button.
Display the movie with the
2 Press the
3 Select [PLAY] using the
4 Select [
5 Select [START] using the
The movie is played back.
I MUTING THE BEEP TONES
1 Press the
2 Select [SETUP] using the
3 Select [
4 Select [OFF] using the
5 Press the
button.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000
Technical Support (USA):
24/7 online automated help: http://support.olympusamerica.com
Phone customer support: Tel. 1-888-553-4448 (Toll-free)
Our Phone customer support is available from 8 am to 10 pm (Monday to Friday) ET
E-Mail: distec@olympus.com
Olympus software updates can be obtained at: http://olympus.com/digital/
(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany. Tel. 040-237730
(Hotline Numbers for customers in Europe)
button, it moves
Tel. 01805-67 10 83
Tel. 00800-67 10 83 00
button
Tel. +49 180 5-67 10 83
Tel. +49 40-237 73 899
Our Hotline is available from 9 am to 6 pm (Monday to Friday)
(E-Mail) di.support@olympus-europa.com
© 2001 OLYMPUS OPTICAL CO., LTD.
Printed in Japan
1AG6P1P1146--
button for more than 1 second to display the Erase menu.
ERASE] using the
/
buttons and press the
button with the lens barrier closed.
button to display the Play menu screen.
/
buttons and press the
] using the
/
buttons and press the
ALL ERASE] using the
/
ALL ERASE] using the
/
)
button for more than 1 second. The
button for more than 1 second.
button with the lens barrier open to display the Camera menu.
/
buttons and press the
/
buttons and press the
MOVIE] using the
/
buttons and press the
button again to exit the menu. The monitor will turn on.
button with the lens barrier closed.
symbol indicated.
button to display the Play menu.
/
buttons and press the
] using the
/
buttons and press the
/
button and press the
button with the lens barrier open to display the Camera menu.
/
buttons and press the
] using the
/
buttons and press the
/
buttons and press the
button again to exit the menu.
OLYMPUS AMERICA INC.
OLYMPUS OPTICAL CO.(EUROPA) GMBH.
(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.
for Germany
for Austria, Belgium, Denmark, France, Netherlands, Norway,
Sweden, Switzerland, United Kingdom
for Finland, Italy, Luxemburg, Portugal, Spain, Czech
Republic
for Greece, Croatia, Hungaria and the Rest of Europe
button.
button.
button.
buttons and press the
button.
buttons and press the
button.
symbol is displayed.
symbol and press the
button.
button.
button.
button.
button.
button.
button.
button.
button.
VT296801

Advertisement

loading

This manual is also suitable for:

Camedia d-30