Table of Contents
Advertisement
(3) Input Block:
You can block the input source by this function, for example, if you want to blockAV input, just highlight 2
[AV] and push the [ENTER] button, TheAV input will not be seen in the screen.
(4) Change Password:
At the first time, you can use the default password. If you want to change it. This function will be needed.
First enter the new password then enter the same password again. You will get the new password.
(5) CleanAII
This function will let you clean all the channels remembered in this TV.
Note: if you choose this function, all the program you preset will be lost.
TV Settings
1.Press
MENU.
The OSD opens.
2.Press
Aorv
to highlight
TV, then press
_,
to enter the TV menu.
3.Press
Aorvhighlight
an option,
then press,q
orl_to adjust
the option.
You can
adjust:
Tuner
Mode-Select
the TV signal
source.
You can select
Antenna
or Cable.
Channel
Scan-Scans
for channels
that have signals
and stores
the channels
information
in memory.
When
you presswork,
your TV skips any channels
that do not have a signal.
Channel
Skip-
Deletes
a channel
stored
in memory.
Whenyou
pressAorv,
yourTVskips
the channel
you deleted.
You can still tune to the channel
using
the number
buttons
on the
remote
control.
MTS-Selects
the sound
mode.
You can select
Mono, Stereo,
or SAP(second
audio
program)
Audio
Language-Selects
the audio
language
for a program.
Appendix
Cleaning and Care
WARNING: Do not try to remove the cabinet back. Refer servicing to qualified service technicians.
To clean the TV screen:
1) Unplug the TV to avoid possible shock hazard.
2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water
to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause
damage to the TV.
3) Wipe offany excess moisture with a clean dry cloth.
4) Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.
-17-
Advertisement
Table of Contents
