Usingthe Remotecontrol; Preparingthe Remotecontrolfor Use - ProScan 47LB45H User Manual

Using the remote control
Preparing the remote control for use
Installing the remote control batteries
1. Open the battery cover on the back of the remote control.
2. Install two AAA size(1.5V) batteries. Match the +
compartment.
3. Close the battery cover.
and - signs on the batteries to the signs on the battery
Note:
1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire.
2.Do not mix battery types or combine used batteries with new ones.
3.Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.
4.If you do not use the remote control for a long time, remove the batteries.
5.The effective range of remote control is suggested in the following.
6m
15°
15°
6m
-9-
8m