Changing Channels; Volume Adjustment; Display Channel And Mode - ProScan 19LA20Q Instruction Manual

1. Press the UP and DOWN keys on the remote control or the CH+ and CH- buttons on the cabinet to move channels UP
and DOWN respectively.
2. Your remote control also has keys "1" through "9" and "0" which can be used to directly select single digit channel
selections up to channel 9 without scrolling through every channel to reach your desired channel.
3. For channels higher than channel 9 press the "-/--" key once and a "--" symbol will appear on the screen indicating the
unit is waiting for you to select the two digits of the channel. Select the channel by pressing the numbers, for example
for channel 15 press "1" then "5".
4. Press the -/-- button again for channels between 100 and 199. The symbol "1--" will appear in the top left of the screen,
indicating the unit is waiting for you to input the second two digits of the 3-digit channel number.
5. NOTE - to return from 2-digit or 3-digit channel selection to single digit channel selection you must press the "-/--" button
until "-" is displayed in the top let corner of the screen.
6. To return to the previous channel you were watching press the button with two opposing arrows (above the EXIT button)
on the remote control.
Adjust the volume using the UP and DOWN arrow buttons on the remote or the VOL+ and VOL- buttons on the cabinet.
Note: you must exit any on-screen menus beforehand.
To see what channel you are watching:
1. Press the DISPLAY button on the remote control and the channel number will appear in the top left of the screen.
2. Press the DISPLAY button again to remove.
17