Graco TexSpray GTX 2000 Operation Manual page 14

K
plug
Always have material outlet
•
plug installed in opening (K or
L) that you are not using when
there is material in hopper. If
plug is removed, hopper will
drain out.
• also
Always have material hose
installed in the opening (K or L)
when there is material in hop-
per. If hose is removed, hopper
will drain out through pump.
14
L
T
U
ti3787a
• Compressor air pressure is con-
trolled with the pressure control
knob (T) and displayed on gage.
closed
ti4005a
ti3910a
• Gun air pressure is regulated using air pressure control on sprayer (U)
as well as gun air valve located on gun handle (23). The site gage on
sprayer enables duplication of air pressure setting. The gun air valve
(23) allows for additional air pressure adjustment.
Setup
23
309915D