Wetting Hose - Graco TexSpray GTX 2000 Operation Manual

Wetting Hose

Wet inside of hose before each use
to flush out sediment and prevent
texture material from packing out
hose.
ti4290a
WASTE
4 Trigger gun into waste pail until
hopper no longer contains
water.
10
water
ti3898a
1 Pour one (1) gallon (3.8 liters)
of clean water into hopper.
5 Open gun air valve (23) to
relieve compressor air.
closed
ti4005a
2 Close gun air valve (23).
23
23
ti3903a
3 Start engine, page 15. Aim gun
into hopper (G) and trigger gun
to circulate water for a few min-
utes to wet inside of material
hose.
Setup
309915D