Use Of The Projector As Ftp Server - Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Chapter 9 Network Viewer functions

Use of the projector as FTP server

You can use the projector in which a USB memory is inserted into the USB terminal as an FTP server.
By using it as an FTP server, you can save the projection data that is converted by Network Viewer 5
[File Converter1, File Converter2] on the USB memory, and project the data with the Network viewer
function in this projector or the other projectors.
Copy the data for projections to the projector which is put USB memory in.
1
Start the Explorer of the computer, and then enter the IP address of the projector in which a USB
memory is inserted (for example, ftp://192.168.1.201) to the address column.
Contents of the USB memory are displayed as follows.
2
Copy the data for projections in USB memory.
Note:
If the network PIN code is set for the projector, the authentication window appears as below. In this
case, enter "user" in the user name and enter the network PIN code of the projector in the password.
*Be sure to enter "user" in the User Name
10