Sanyo PLC-XU116 - 4500 Lumens Owner's Manual page 96

Chapter 8 Network capture functions
[3] Control by the projector
* PC provides the Network Capture.
PC1
PC3
Select "Network" in the Input menu previously.
1
Select "Network capture" in the Network menu. Press Point 8 or SELECT button.
2
Select "PC number" and press SELECT button and using Point ed buttons to select the PC number
to connect, and then press SELECT button.
3
Select "Connected" and then press SELECT button to start capturing. The screen image of the
selected computer will appear on the projected screen in real time.
4
To end capturing, select "Disconnect" and then press SELECT button.
✐ The IP address of the connecting PC should be registered previously (+ p.93).
✐ If the error message appears, check item "Parameter set up" (+ p.92).
✐ The projector does not provide the function to register the IP address of the computer and to set the parameter of
the capturing. They should be registered by using the web browser previously (+ p.93).
✐ The remote control which is provided with the projector does not have the mouse operating function.

PC2
Capture
PC4
PC5
PJ1 PJ2
PC6
* Star t captur ing of
t h e P C 1 f r o m t h e
projector PJ2.
Project a screen
image of PC1 with
PJ2.
Set "On" when
using the wireless
mouse function