Golden Technologies GP204 Owner's Manual page 17

Alante DX/LT Owner's Manual
Joystick Installation
1. Insert the joystick mounting tube into one of the mounting tubes under the armrest
pads.
Speed Setting
LED Array
Speed Setting
SLOWER
Top View
2. Adjust the position of the joystick to a comfortable spot.
3. Tighten the joystick adjustment screw with a 4mm Allen wrench.
4. Secure the joystick cable to the arm with the cable retaining straps.
IV. ASSEMBLY
Battery Charge
LED Array
ON-OFF Button
Horn Button
Speed Setting
FASTER
Figure 9
Joystick
adjustment screw
Figure 10
Joystick
mounting tube
Mounting
tube (Arm)
Joystick
adjustment
screw
Rev A_011811
Bottom View
16