Golden Technologies GP204 Owner's Manual page 16

Alante DX/LT Owner's Manual
The seat assembly weighs 36 pounds. Please ask for help if you do not
feel capable of safely lifting that much weight. Removal of arms will reduce the
weight of the seat.
Be sure the seat is correctly installed and locked before operating your
power chair
Arm and Seat Belt Installation
1. Use a 4mm Allen wrench to remove the arm width adjustment screw from the arm
receiver tube at the bottom rear of the seat frame. See figure 7.
2. Insert the arm into the arm receiver tube, so that the arm pad faces toward the front of
the unit.
3. Adjust the width of the arm.
4. Insert the arm width adjustment screw (provided with the seat belt) through the anchor,
and secure by tightening the adjustment screw. See figure 8.
5. Repeat steps 1 – 4 for the opposite side.
15
IV. ASSEMBLY
Figure 7
Figure 8
Rev A_011811