Sony Handycam CCD-TR2300 Service Manual page 45

Ncrt4 _rl bettawy life
The batteries for the I/,emot_ Commander last about 6 month_ under normal operation.
When the batteries become weak or dead, the Remote Commander does not work.
To avoid damage from possible battery feakage
Remove the batteries when you will not use the Remote Commander for a long time.
To use the Remote Commander
Make sure that the COMMANDER is set to ON in the menu system on the camcorder,
and that the HOLD switch on the Remote Commander is not working. When using the
Handycam Station, set COMMAND MODE to VTR 2 and aim the Remote Commander
at the remote sensor on the Edit Station.
O
MENU
u_nu
counTsn
c_c _o set
_c uoc_
i_nUl : tno
_F
Remote control direction
Notes on the remote commander
• Keep the remote sensor away from strong light sources such as direct su_ight or
illumination. Otherwise, the remote control may not be effective.
• Be sure that there is no obstacle between the remote sensor on the camcorder and the
Remote Commander.
• This eamcorder works in commander mode VTR 2. The commander modes (1, 2 and
3) are used to distinguish this eamcorder from other Sony VCRs to avoid remote
control misoperation, If you use another Sony VCR in commander mode VTR 2, we
recommend you change the commander mode or cover the remote sensor of the VCR
with black paper.
I
Attaching the shoulder strap
Attach the supplied shoulder strap to the hooks for the shoulder strap
,,J
95 96