Sony Cyber-shot DSC-WX150 Instruction Manual page 78

• The above number of images applies wizen the battery pack is fl/lly charged. The
number of images may decrease depending on the conditions of use.
• The number of images that can be recorded is for shooting trader the following
conditions:
Using Sony "Memory Stick PRO Duo" (Mark2) media (sold separately)
- The battery pack is used at an ambient temperature of 25°C (77°F).
[Disp. Resolution]: [Standard]
• The nmnher lot "Shooting (still images)" is based on the C1PA standard, and is for
shooting tinder the lollowing conditions:
(CIPA: Camera & hnaging Products Association)
DISP (Display Setting) is set to [ON].
-Shooting once every 30 seconds.
The zoom is switched alternately between the W and T ends.
The flash strobes once every two times.
The power turns on and off once every ten times.
• The battery life for movies applies shooting under the lollowing conditions:
Movie quality: AVC HD HQ
Wizen continuous shooting ends because of set limits (page 25), press the
MOVIE (Movie) button again and continue shooting. Shooting flmctions such as
the zoom do not operate.
# Supplying power
The camera can be supplied with power from the wall outlet (wall socket) by
connecting to the AC Adaptor, using the micro USB cable (supplied).
You can import images to a computer without worrying about draining the
battery pack by connecting the camera to a computer using the micro USB
cable.
In addition, you can use the AC Adaptor AC-UDI 0 (sold separately) for
shooting to supply power when shooting.
• Power
cannot be supplied when the battery pack is not inserted in the camera.
• When the camera is connected directly to a computer or to a power outlet using the
supplied AC Adaptor AC-UBI0/UBIOB, power supply is available only in
playback mode. If the camera is in shooting mode or while you are changing the
settings of the camera, power is not supplied even if you make a USB connection
using the micro USB cable.
• If you connect the camera and a computer using the micro USB cable while the
camera is in playback mode, the display on the camera will change h'om the
playback screen to the USB connection screen. Press _i (Playback) button to
GB
14 switch lo lhe playback screen.