Sony DSC-WX150 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Digital Camera
  5. Cyber-shot DSC-WX150
  6. Service manual

Sony DSC-WX150 Service Manual

Digital still camera
Hide thumbs Also See for DSC-WX150:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Ver. 1.0 2012.03
Internal memory
Internal memory
ON BOARD
ON BOARD
SERVICE NOTE (Check the following note before the service.)
- ENGLISH -
The components identified by
Les composants identifiés par
mark 0 or dotted line with mark
une marque 0 sont critiques pour
0 are critical for safety.
la sécurité.
Replace only with part number
Ne les remplacer que par une piè-
specified.
ce portant le numéro spécifié.
DSC-WX150_L2
9-834-650-31
DSC-WX150
Canadian Model
AEP Model
Chinese Model
Korea Model
Photo: Silver
DIGITAL STILL CAMERA
Ver.
Date
2
LEVEL
1.0
2012.03
Official Release
US Model
UK Model
E Model
Sony Corporation
Revision History
History
Contents
-
983465031.pdf
S.M. Rev.
issued
-
2012C08-1
© 2012.03
Published by Sony Techno Create Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony DSC-WX150

Summary of Contents for Sony DSC-WX150

  • Page 1: Table Of Contents

    0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piè- specified. ce portant le numéro spécifié. 2012C08-1 DSC-WX150_L2 © 2012.03 Sony Corporation 9-834-650-31 Published by Sony Techno Create Corporation...
  • Page 2 CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM- Dimensions (CIPA compliant): MPF Baseline) compliant, NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT DPOF compatible 94.7 mm × 56.4 mm × 21.6 mm SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES...

  • Page 3: Precaution On Replacing The Sy-327 Board

    1. SERVICE NOTE 1-1. PRECAUTION ON REPLACING THE SY-327 BOARD 1-2. ADDITION OF DESTINATION DATA FILE If the Destination Data file included in the Adjust manual is old, “DESTINATION DATA WRITE” cannot be executed in some cases. DESTINATION DATA In that case, download a new Destination Data file from the TISS homepage according to the following procedure. When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
  • Page 4 3) Search the model whose new Destination Data file you want to get on the TISS homepage. 6) Click the [File Update] button in the window. When the Destination Data file has been updated, a file with a name “Destination File For ‘model name’.zip” is registered. (Example) Destination File For DSC-WX50.zip Furthermore, the version supported by the Destination Data file is shown in the Remarks column.

  • Page 5: Precaution On Replacing The Lens

    1-3. PRECAUTION ON REPLACING THE LENS 1-5. HOW TO WRITE DATA TO INTERNAL MEMORY When replacing the lens, read the QR code given on the data sheet of Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera. the replacement lens for service.

  • Page 6: Self-Diagnosis Function

    1-6. SELF-DIAGNOSIS FUNCTION 1-6-1. Self-diagnosis Function 1-6-2. Self-diagnosis Display 1-6-3. Self-diagnosis Code Table When problems occur while the unit is operating, the self-diagnosis func- When problems occur while the unit is operating, the LCD screen shows tion starts working, and displays on the LCD screen what to do. a 4-digit display consisting of an alphabet and numbers, which blinks at Self-diagnosis Code Details of the self-diagnosis functions are provided in the Instruction...

  • Page 7: Process After Fixing Flash Error

    1-7. PROCESS AFTER FIXING FLASH ERROR 1-8. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD Removal When “FLASH error” (Self-diagnosis Code E : 91 : 01) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed automatically to disabling charge and flash setting.

  • Page 8: Dc Motor Worm Assy Replacing Method

    1-9. DC MOTOR WORM ASSY REPLACING METHOD Removal Installation 1. Disengage the two claws and remove the FG Leaf Spring. 1. Install the LF-139 Flexible Board to the DC Motor Worm Assy and solder the LF-139 Flexible Board at two locations. 2.

  • Page 9: Three Tube Lubricating Block Assy And Group 1 Frame Replacing Method

    1-10. THREE TUBE LUBRICATING BLOCK ASSY AND GROUP 1 FRAME REPLACING METHOD Removal 9. Detach the Rear Mirror Plate and remove the Gear Worm Wheel, Gear A, and Gear B. 1. Disengage the two claws and remove the FG Leaf Spring. 2.
  • Page 10 15. Turn the 3 Group Assy approx. 20° in the arrow direction. 19. Fully turn the Cam Tube B in the arrow direction. 16. Disengage the three Claws with tweezers. Tweezers Cam Tube B 3 Group Assy 20. Remove the 2 Group Frame. 21.
  • Page 11 Installation 5. Install the 1 Frame Assy so the Lever positions match. Note: Confirm that the Barrier closes when the 1 Frame Assy is pushed. 1. Align the Lever with the cutout as shown in the figure, and then install the Straight Tube to the Cam Tube B. Note: Be sure to set the Straight Tube at the correct insertion position.
  • Page 12 11. Turn the Gear in the arrow direction to extend the Mirror Plate slightly. 17. Connect the two Flexible Boards to the Connectors on the LF-139 Flexible Board. 12. Turn portion A in the arrow direction to TELE end and remove the Flexible Board from the hole in the Stationary Tube Assy. 18.

  • Page 13: Final Inspection

    1-11. FINAL INSPECTION 1-11-2. Inspection When Cam Tube Block Assy Or Straight Tube Lubricated Assy Is Replaced Focus check 1 Preparation 1-11-1. Confirm There Is No Fault In Actual Motion/Actual Screen • Camera installed re-assemble lens.   • Chart (Printed PDF file at the same magnification) (Refer to <Reference>) Inspect it as follows when you exchange parts in the lens block.
  • Page 14 2. REPAIR PARTS LIST IDENTIFYING PARTS (ENGLISH) The components identified by mark 0 NOTE: or dotted line with mark 0 are critical for Follow the disassembly in the numerical order given. safety. • -XX, -X mean standardized parts, so they may have some differences from the original Replace only with part number specified.
  • Page 15 NOTE FOR REPAIR Cut and remove the part of gilt Cut and remove the part of gilt which comes off at the point. which comes off at the point. • Make sure that the flat cable and flexible board are not cracked (Be careful or some (Be careful or some of bent at the terminal.
  • Page 16 2-1. EXPLODED VIEWS DISASSEMBLY 2-1-1. REAR SECTION 1. Remove to numerical order ( ) in the left figure.  to #212/#244 X 6 Bottom View Left View Right View When assembling, #212 adjust the position. #212 #244 #212 #244 #212 #244 #244 (Claws) (Note 1)
  • Page 17 DISASSEMBLY 2-1-2. FRONT/TOP SECTION 1. Remove to numerical order ( ) in the left figure.  to 2. The meaning of the sign in left figure is as follows. Be careful when it removes. ns : not supplied (Claws) ◇-X: Solder (Note 3) #212/#244 X 1 →...
  • Page 18 DISASSEMBLY 2-1-3. MAIN SECTION 1. Remove to numerical order ( ) in the left figure.  to 2. The meaning of the sign in left figure is as follows. Be careful when it removes. ◇-X: Solder (2) Plate (SP) (770) Lens Block Section Note (See page 2-6) (Note 1, 4)
  • Page 19 DISASSEMBLY 2-1-4. LENS BLOCK SECTION 1. The meaning of the sign in left figure is as follows. Be careful when it removes. ◇-X: Solder ns : not supplied Screw #176: M1.2 X 2.0 #30: M1.2 X 3.5 (Tapping) #258: M1.4 X 3.5 (Tapping) (White) (Silver) (Silver)
  • Page 20 ACCESSORIES Ref. No. Part No. Description Ref. No. Part No. Description 1-489-282-21 AC Adaptor (AC-UB10/UB10B) (US, CND) * 906 4-417-826-61 Instruction Manual (ENGLISH, TRADITIONAL CHINESE, 1-489-282-31 AC Adaptor (AC-UB10/UB10B) (CH) SIMPLIFIED CHINESE, MALAY, INDONESIAN, THAI, 1-489-282-61 AC Adaptor (AC-UB10/UB10B) (EXCEPT US, CND, CH) ARABIC, PERSIAN) 1-837-421-11 Power cord (mains lead) (UK, E (Saudi))
  • Page 21 3. ASSEMBLY Assembly-1: Precaution During Speaker Installation. Assembly-2: Precaution During of ST-269 Flexible Board. Assembly-3: Precaution During of Lens Block. Assembly-4: Attaching Method of LCD Cushion (180), LCD Window (180). Route the speaker harness as shown below. Install the ST-269 flexible board. Hook the flexible board to the boss.

Table of Contents