Before Editing - Sony Video8 Handycam CCD-FX620 Operation Manual

You can create your own video program bz.editing with any other l_l 8 mm,
I,Ii_
Hi8, r_ Betamax, vlls VHS,
S¥11S S-VHS, _ VHSC, or 5[I_11S[.._ S-VHSC VCR that has audio/video inputs.
Before Editing
After connecting the camcorder to your VCR (p. 22-24). (1) Set the POWER switch to VTR. (2) If you do not
use the connecting adaptor, set IN/OUT to OUT. (3) Slide EDIT on the camcorder in the direction of the arrow.
I ill I]
OUT ! I IN
i
I I
: Signalflow
VIDEO AUDIO IN
J
(1) Insert a blank tape (or a tape you want to record over) into the recording VCR. Then insert your recorded
tape into the camcorder. (2) Play back the recorded tape on the camcorder until you locate the point where
you want to start editing. Then set the camcorder to playback pause mode. (3) Set the recording VCR to
recording pause mode. (4) Press II on the camcorder and VCR simultaneously to start editing.
To Edit More Scenes
Repeat steps 2 to 4.
To Stop Editing
Press L J on the camcorder and VCR.
Use of the EDITSEARCH button
To play back a tape in the forward or reverse direction, keep pressing EDITSEARCH during playback pause.
You can play back still pictures successively at specific intervals by pressing EDITSEARCH intermittently.
Note on the DATA SCREEN function
If you have displayed the viewfinder screen indicators on the TV (DATA SCREEN function), erase the
indicators by pressing DATA SCREEN on the Remote Commander so that they will not be recorded on the
edited tape.
Notes on EDIT
• It functions when using the camcorder as a VCR for playback.
• By using EDIT, you can keep picture and sound deterioration resulting from editing to a minimum.
• Avoid recording re-recorded tapes.
co
CD
co
0
¢b
"-1
@
E
13.
13.
o
33
@
o
o
a
..--I
"o
m
o_
o
o
.-.i
:r
m
--.t
37