Sony Video8 Handycam CCD-FX620 Operation Manual page 27

Advanced Operations
You can choose any of the following power sources for your camcorder: Battery pack (p. 6), house current,
and 12/24 V car battery.
The appropriate power source for you to choose depends on the place where you want to use your
camcorder.
Place
Outdoors
indoors
In the car
Power source
Battery pack
House current
12 V or 24 V car battery
Accessory to be used .............. :
Battery pack NP-55 (supplied), NP-77H/77HD, NP-77,
NP-66H or NP-55H
AC power adaptor AC-V25S (supplied), or AC-S10
DC pack DCP°77
Note on power sources
Disconnecting the power source or detaching the battery pack during recording or playback may damage the
inserted tape. If this happens, supply the power again immediately.
With the Connecting Adaptor
Use the suppiied AC-V25S AC Power Adaptor and connectingadaptor.
(1) Attach the connectingplate of the connectingadaptor to the camcorder (p.22). Attach the AC power
"13
-t
adaptor to the connecting adaptor (p.22). And connect the power code of the AC power adaptor to a wall
outlet. (2) Set the VTR (DC OUT)/CHARGE selector on the AC power adaptor to VTR (DC OUT). ,c:.
1 2
¢-
J
See next page for further information
27