Various Playback Modes; Playing Back A Tape - Sony Video8 Handycam CCD-FX620 Operation Manual

Various Playback Modes
To View a Still Picture (Playback Pause)
Press II during playback. To resume playback, press II or _.
To Locate a Scene (Picture Search)
Keep pressing _ or _ during playback. To resume normal playback, release the button.
To Monitor the High-speed Picture During Fast-forward or Rewind (Skip Scan)
Keeppressing _ whilerewinding, or_ whileadvancing thetape.To resumenormal p layback, press_.
To View the Picture in a Sequence of Stop-motion Images
Press EDITSEARCH repeatedly in playback pause mode. If you keep pressing EDITSEARCH, you can view
the playback picture forward (+) or reverse (-).
To View the Picture at 1/5 Speed (Slow Playback) (only with the Commander)
Press I1=.-on the commander during playback. To resume normal playback, press D. When slow playback
lasts for about 1 minute, it shifts to the normal speed starts automatically.
Notes on playback
• Streaks may appear and the sound may be muted depending on playback mode.
* When still picture mode lasts for about 5 minutes, the camcorder automatically enters stops.
To display the vlewflnder screen indicators on a TV
Press DATA SCREEN on the Remote Commander.
To erase the indicators, press DATA SCREEN again.
Playing Back a Tape with Dual Sound Tracks
• Normally set the Hi-Fi SOUND switch to the • position.
• When the tape with dual sound tracks is played back, set the Hi-Fi SOUND switch to the desired sound, 1 or
2.
* When you connect to a TV using the RFU adaptor or when the TV or VCR is a monaural type, set the Hi-Fi
SOUND switch to 1 or 2.
26
To use the supplied Remote Commander for playback and camera recording, do the following: (1) Insert
supplied two size AA (R6) batteries with correct polarity. (2) Set W REMOTE COMMANDER on the battery
mounting surface of the camcorder to ON.
2
REMOTE
_J
Notes on the Remote Commander
• Keep the remote sensor away from strong light such as direct sunlight or illumination. Remote control with
the Remote Commander may not be effective.
• The command mode of the Remote Commander is VTR2. Avoid using the Sony VCRs with the same
command mode at the same time.